OCEANUS – The powerful package for professional use
Durable and robust: Frame, handle and safe filling valve made from rust-free material
Minimum wear: Thanks to piston rings made from innovative high-tech plastic
Impressive performance data: At charging rate of 140 l/min
Really easy to transport: Outstandingly light in weight and easy to handle
The OCEANUS impresses with its excellent performance data: despite being almost identical in size, it can fill a breathing air cylinder up to 40% faster than the JUNIOR II.
Designed for challenging professional applications, it impresses with its durability, mobility and high free air delivery.
Thanks to the corrosion-resistant base frame made from stainless steel, the OCEANUS is the ideal compressor even for tropical climates. It is used on ships, submersibles and expeditions, and is also suitable for use as a paintball compressor, sport shooting compressor or mobile fire service compressor.
A generous oil reserve in the crankcase and the powerful oil pump mean that operation is also possible even at very oblique angles up to 30° (up to 20° in the petrol version).
This quiet and compact unit can be carried easily by a single person and will fit in almost any car boot.
All the information you need at your fingertips!
OCEANUS compressor block
The integrated low-pressure lubrication with slow running gear pump increases the service life of all moving parts of the compressor block. Read more
P 21 filter system
When used in conjunction with original BAUER filter cartridges, the P 21 filter system with integrated oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 140 m³ of air can be treated.
¹ If the units are maintained and installed correctly as described in the operating instructions or user manual and if the concentration of CO2 in the intake air does not exceed the values specified in the applicable standard for breathing air.
Stainless steel base frame and carrying handle
The stainless steel design provides the best possible protection against corrosion for applications in tropical regions or at sea.
The filling device comprises a flexible "UNIMAM" high-pressure filling hose and filling valve complete with final pressure gauge. The final pressure gauge makes it easy to read off the filling pressure. It is protected against damage by a durable rubber jacket.
High-quality UNIMAM high-pressure filling hoses made from food-safe and long-life hose material make for flexible and safe handling. Swivel hose connections enable the filling valve to be connected to the breathing air cylinder quickly, easily and safely.
The well-known GS mark which comes as standard with the JUNIOR II certifies that the compressor has been tested for safety and meets the exacting requirements of the German Equipment and Product Safety Act. Conformity and compliance with all DIN standards is assured.
Automatic condensate drain complete with automatic switch-off when the final pressure is reached
The automatic condensate drain removes water from the intermediate separator and the final separator automatically during both operation and shutdown. This makes things infinitely more convenient for the operator, as there is no longer any need for the time-consuming process of draining condensate manually at regular intervals. Another benefit is that the compressor is switched off automatically when the final pressure is reached.
At BAUER, safety always comes first: all of our models are equipped with an electric drive conforming to DIN EN 60204 for full CE conformity with a miniature control complete with control transformer.
Additional filling device PN 200 or PN 300 bar
There is the option to supplement an existing filling valve with the addition of one or more filling valves with filling hoses of varying lengths.
The trolley for the COMPACT-LINE units is designed for the simple and safe transportation of your compressor across any terrain. This is ensured by the large pneumatic tyres and the stable manner in which the compressor is secured.
For maximum flexibility, you can either leave the compressor on the trolley or lift it down to operate it. Turning a handle on the trolley allows you to secure your JUNIOR or OCEANUS in place and lift it back down again.
The length of the handle can also be adjusted to make handling the trolley particularly easy. The handle can also simply be detached to allow for convenient transportation of the trolley by car.
All electric motors are available with other voltages and frequencies on request. A voltage range from 110 to 690 V at 50/60 Hz is covered.
Paint finish/Special paint finish
All frame parts are made from stainless steel.
|Charging rate ¹||Drive||Net |
L × W × H
|OCEANUS-B||140||Robin/Subaru 4-stroke petrol engine||5||47||79 × 35 × 42|
|OCEANUS-E||140||Three-phase motor, 400 V, 50 Hz ²||3||52||66 × 40 × 42|
|OCEANUS-W||140||Alternating current motor 230 V, 50 Hz ²||3||52||66 × 40 × 42|
¹ Measured with cylinder filling from 0 to 200 bar, ±5%
² Option of different voltage/frequency available